Concrete Sealing & Epoxy Floors in Brazoria County
Grind-and-seal, clean-and-seal and epoxy flooring for homes and businesses in Angleton, Brazoria County and the Texas Gulf Coast. Tell us about your concrete and the finish you want.
From garage and commercial floors to custom conference tables and resin wall art, we bring your ideas to life. Concrete preparation, restoration, grinding and sealing are available too.
Bring new life to indoor floors, driveways, patios, porches, pool decks, and walkways. We’ll review the existing finish and choose the right preparation for your project.
CLEAN & SEAL
Clean-and-Seal Concrete
Clean the concrete and apply a suitable sealer. A practical option when the existing surface is sound and does not need mechanical grinding.
For indoor concrete floors and outdoor surfaces, including driveways, patios, and walkways.
Mechanically grind the concrete, clean the prepared surface, and apply a suitable sealer. For projects that need surface preparation or removal of an existing coating.
For indoor floors and suitable outdoor concrete, with the finish selected around surface condition and use.
The buildup often called “mildew” can include algae, mold and other organic growth. Along the Texas Gulf Coast, humidity, rain and morning dew keep shaded driveways, sidewalks and patios damp. Porous concrete, standing water and accumulated leaves or debris create conditions where growth can return.
More than a curb-appeal issue.
Biological buildup can make concrete slippery when wet. Removing the film improves the appearance of your property and helps address a source of slippery footing on walkways, entrances and outdoor gathering areas.
Clean thoroughly. Seal appropriately.
We assess the surface, discuss suitable treatment for organic buildup, and clean with methods matched to the concrete’s condition. Once the surface is properly prepared and dry, we recommend a sealer suited to its exposure, traffic and traction needs. A suitable penetrating water-repellent sealer can help reduce water absorption.
Cleaning and sealing are part of ongoing care. Growth can return where moisture and debris remain, so keeping drains clear, sweeping leaves and addressing persistent damp areas helps maintain the results.
Tell us whether your project is inside or outside. We’ll discuss the desired appearance, traffic, exposure, and traction needs before selecting the finish.
TILE, VCT & OLD FLOORING REMOVAL
Out with the old. Ready for what’s next.
Flooring demolition for homes and commercial spaces in the Texas Gulf Coast and beyond. Remove worn flooring and prepare the underlying concrete for your next finish.
FLOORING DEMO
Tile & VCT removal.
Ask about ceramic and porcelain tile demolition, VCT (vinyl composition tile) removal, and other existing flooring. We review the material, condition and access before confirming the removal plan.
CONCRETE PREPARATION
Get back to the slab.
Discuss thinset and adhesive removal, concrete grinding and prep, and leveling and smoothing for your next flooring system, epoxy coating or grind-and-seal finish. Preparation needs are assessed after the old flooring is removed.
Hallway tile removal in progressKitchen tile removal in progress
Send photos of the existing flooring, your project location and approximate square footage.
Explore epoxy floors, resinous flooring and concrete restorations for your home or business in the Texas Gulf Coast and beyond.
EPOXY & RESINOUS FLOORING
A finish for your space.
Discuss epoxy, epoxy floors and resinous flooring for garages, commercial interiors and industrial spaces. Looking beyond the floor? We also offer epoxy bar top, table and countertop finishes.
Concrete grinding and prep, leveling and smoothing, and preparation for a new coating or sealer. We’ll review the existing slab and the finish you want before outlining the work.
For a concrete finish, explore grind and seal concrete or clean and seal concrete services for suitable indoor and outdoor surfaces.
Ask about vapor barriers and concrete moisture mitigation as part of your flooring project. We’ll discuss your slab’s condition and the assessment and product requirements for the proposed system.
Know what your floor needs before you commit to the work.
Work directly with Jeremy Kuhlman, owner of Coastal Concrete Coatings Texas. On-site assessments and project consulting are available for hotels, resorts, commercial properties and property managers across the Texas Gulf Coast.
PAID ON-SITE ASSESSMENT
Find out what to repair first.
Jeremy walks the floor with you, documents visible conditions such as cracking, worn sealer or peeling coatings, and flags areas that may need further testing.
Get a photo report, repair priorities, practical options, preliminary budget ranges and phasing recommendations around guest traffic or operating hours.
Scope and fee are confirmed before booking. Installation and project oversight can be quoted separately.
Talk through surface prep, grind-and-seal, concrete restoration, epoxy systems and moisture concerns before choosing a scope. Start with photos, approximate square footage, how the space is used and any downtime limits.
Ask about material ordering direct from distribution for your coating, preparation or sealing project. We’ll discuss the products, quantities and distributor availability before confirming an order.
Pricing, lead times, delivery or pickup arrangements and order terms are confirmed for your request.
Custom epoxy finishes for bar tops, countertops, tables & more—including conference tables and one-of-a-kind resin wall art for homes and commercial spaces. Tell us what you have in mind.
BAR TOPS
Make the gathering spot stand out.
Give your home bar or commercial bar top a distinctive epoxy finish. We’ll discuss colors, appearance, edges and how the surface will be used.
Explore an epoxy finish for a dining table, coffee table, conference table or other tabletop. Share the dimensions, surface material and your design ideas so we can review the project.
Plan an epoxy countertop finish for a kitchen, bathroom or commercial counter. We’ll assess the existing surface and discuss preparation, finish options and care.
Send photos, length and width, and your preferred colors. We’ll review surface suitability and provide project-specific curing and care guidance.
RESTAURANTS · BARS · RESORTS
Bring the coast to your tables, bar tops & countertops.
Watch our aquamarine and seafoam table reveal, then explore real epoxy project footage. Individual statement tables or a coordinated dining area—let’s discuss your space.
Sculpted wood. Blue resin. A clear epoxy finish that brings the whole design together. Explore the transformation of this custom bar top, from carved contours to its finished surface.
BEFORE / CARVED WOOD
Carved contours before the resin fill
AFTER / CLEAR EPOXY FINISH
Blue inlays beneath a clear finished surface
Actual project photos show different viewpoints and stages of the same bar top.
Explore epoxy bar tops and countertops, floor coatings and concrete preparation. Select a photo to view it full size.
Epoxy Bar Tops, Tables & Countertops
Clear-coated wood and decorative copper, bronze and gold epoxy finishes. Select a photo to see the surface up close.
Mirror-gloss bar top
Clear-coated wood counter
Live-edge wood top
Bronze epoxy bar top
Gold decorative countertop
Decorative epoxy detail
Finished epoxy counter
Flake Floor Coatings
Commercial interior
Flake coating detail
Workshop flake floor
Commercial flake finish
Interior flake coating
Garage and workshop finish
Flake detail
Metallic & Decorative Floors
Copper interior finish
Copper metallic finish
Decorative floor and entry
Bronze metallic detail
Commercial metallic floor
Solid-Color & Commercial Floors
Solid gray finish
Contrasting floor finishes
Large commercial floor
Concrete Preparation
Surface preparation
Coating removal in progress
Concrete surface
Commercial floor preparation
Grinding and coating removal
CONCRETE REFRESH / RESURFACING & SEALING
Refresh the concrete. Renew your space.
Worn concrete does not always need to be replaced. Our refresh process prepares the existing slab, adds a polymer-modified skim coat to smooth or level the surface as needed, and seals it for its next chapter.
FROM THE SLAB UP
Prep. Prime. Smooth. Seal.
Prepare. Assess the slab, clean the surface and remove unsuitable material. Old, porous concrete can hold residue and odors; moisture can contribute to mildew. We review these conditions and their source before selecting the system.
Prime. Apply a compatible primer to the prepared concrete to support the bond of the resurfacing system.
Smooth or level. Apply a polymer-modified skim coat to renew the surface and address uneven areas within the selected product’s requirements.
Seal. Apply a compatible sealer selected for the surface, its use and the desired finish.
From smaller spaces to large commercial floors, Jeremy brings hands-on preparation and leveling experience—including an 80,000 sq ft project—to your concrete refresh.
Original project photos from our floor preparation and leveling album. Views show existing concrete, resurfaced room floors and hallway application details at different stages of the work.
Corridor surfaces
BEFORE RESURFACING
Worn concrete and prepared repairs in a corridor.
AFTER RESURFACING · APPLICATION IN PROGRESS
A fresh resurfacing layer across the corridor, with application still underway.
Room surfaces
BEFORE RESURFACING
An existing room floor with preparation and patching visible.
AFTER RESURFACING
A renewed room floor viewed from the doorway.
Hallway details
BEFORE / PREPARED SURFACE
Exposed concrete and repaired areas ahead of the resurfacing layer.
AFTER APPLICATION · IN PROGRESS
The applied layer meets the prepared slab as work progresses along the hallway.
An affordable, budget-friendly floor refresh: this worn, cracked concrete floor was prepared, coated with epoxy and sealed for a fresh gray finish.
BEFORE / PREPARATION
A worn slab, ready for a refresh.
The existing concrete shows wear and a filled crack before epoxy application.
AFTER / EPOXY APPLIED & SEALED
A fresh finish for the same floor.
A new gray finish transforms the appearance of the existing concrete.
THE FLOOR REFRESH PROCESS
Prepare. Apply epoxy. Seal.
Prepare the existing surface. Review the floor’s condition and address preparation needs before applying epoxy.
Apply epoxy to the concrete. Apply a colored epoxy coating to renew the appearance of the floor.
Seal the finish. Complete the project with a sealer selected for the floor and its use.
Considering concrete floor epoxy application and sealing in the Texas Gulf Coast and beyond? We’ll assess your existing floor and discuss a budget-friendly restoration option suited to its condition.
Review the existing concrete, intended use, and finish options. Grind the surface, then clean and vacuum before coating.
02
Build the finish
Apply tinted epoxy and broadcast decorative flake. Scrape and vacuum excess flake before the protective topcoat.
03
Protect & cure
Apply the polyaspartic topcoat and provide return-to-use guidance for the installed system. Plan for curing time before moving vehicles back in.
TECHNICAL EXPERTISE / PREPARATION & WARRANTY
The finish matters. What’s underneath matters more.
Correct preparation, a suitable coating system and clear written warranty terms belong in the same conversation. Here’s what to discuss before your floor is installed.
1. Start with the slab and the way you use it
Review existing coatings, contamination, cracks, repairs and moisture conditions, along with traffic, cleaning and exposure. Moisture testing and any mitigation should follow the selected system’s requirements; a dry-looking surface alone does not establish suitability.
2. Prepare for a bond, not just a clean appearance
Remove incompatible coatings and contamination, then mechanically prepare the concrete to the surface profile required by the selected coating. Address repairs and joints appropriately and remove preparation dust before application. The required method depends on the slab and the product, not a one-size-fits-all shortcut.
3. Follow the manufacturer’s system requirements
Product compatibility, mixing, application thickness, site conditions, recoat windows and cure time all matter. The selected manufacturer’s current technical data sheets guide these requirements. Return-to-service timing depends on the system and actual conditions, not simply the number of installation days.
4. Ask what manufacturer support actually covers
A manufacturer standing behind its product is not automatically a warranty on the installer’s workmanship. Ask for the named products, applicable product warranty and any project-specific installer approval or manufacturer-backed coverage in writing. Technical support, authorized-installer status and warranty coverage are different things; none should be assumed.
Know who stands behind what.
Before accepting a proposal, review the installation scope and any written workmanship and manufacturer warranty terms separately: who provides coverage, what is covered, its duration, exclusions, maintenance requirements and the claim process. Coverage depends on the actual written terms for your project; this page does not create or extend a warranty.
Coastal Concrete Coatings Texas brings years of hands-on construction and concrete-coating experience to the Texas Gulf Coast and beyond.
Founder Jeremy Kuhlman established his previous coatings business in Colorado in 2017, building experience in surface preparation, epoxy flooring and specialty resin applications. After relocating to Texas, he founded Coastal Concrete Coatings Texas to serve residential, commercial and industrial customers.
Epoxy floors, concrete restorations, grinding and prep, and concrete sealing for coastal homes and businesses.
Coastal Concrete Coatings Texas welcomes project inquiries along the Texas Gulf Coast, from South Padre Island and Corpus Christi to Brazoria County, Galveston and the upper coast.
Brazoria County & Galveston coast
Lake Jackson, Clute, Freeport, Surfside Beach, Brazoria, West Columbia, Galveston, Texas City, Dickinson, League City, Crystal Beach and Bolivar Peninsula.
Matagorda coast & Coastal Bend
Bay City, Matagorda, Palacios, Port Lavaca, Port O’Connor, Rockport, Fulton, Aransas Pass, Port Aransas and Corpus Christi.
Lower & upper Texas coast
South Padre Island, Port Isabel and Brownsville; Beaumont and Port Arthur.
Send your town, project size and photos. Travel arrangements and scheduling for projects beyond the Texas Gulf Coast are confirmed with your estimate.
It depends on the condition of the slab, whether it is indoors or outdoors, the look you want, and how the space is used. Share photos and your goals so we can discuss epoxy, decorative flake, or a sealed concrete finish.
Do you clean and seal outdoor concrete?
Yes. We offer clean-and-seal and grind-and-seal services for indoor floors and suitable outdoor surfaces, including driveways, patios, porches, pool decks, and walkways. We’ll assess the surface and discuss the finish for its location and use.
Is applying epoxy and sealing a budget-friendly floor option?
Applying epoxy and sealing can be an affordable way to refresh suitable existing concrete. We assess surface condition, preparation needs and how the space is used before recommending a finish. See our before-and-after floor refresh project.
How much will my project cost?
Square footage, surface preparation, existing coatings, repairs, and the selected finish all affect pricing. We’ll review your project and provide an itemized quote.
How long will my garage be out of use?
Our garage epoxy installation is planned as a two-day process, followed by curing time. Your final schedule and vehicle return time will be confirmed for the materials and conditions on your project.
Can you remove an old coating?
We offer concrete grinding and coating removal as part of surface preparation. Send photos of the existing floor so we can assess what your slab needs.
LET’S GET YOUR PROJECT MOVING
Your free estimate. A clear next step.
Tell us about your project, or call Jeremy to talk it through. Serving the Texas Gulf Coast and beyond.
Share your project.
Send your city, flooring or surface type, approximate size and a few photos. Unsure of the measurements? We can start with what you know.
Send your request.
Use the form to prepare a text or email, then press Send in your messaging app. You can also text photos directly to Jeremy.
Review the work and price.
Jeremy will discuss preparation, finish options and whether an on-site assessment is needed. Final pricing is confirmed after the project scope and surface condition are reviewed.
Small project? Ask about the minimum.
A minimum project charge applies to smaller jobs to cover setup, equipment and preparation. Your free estimate will identify the applicable minimum before you agree to the work.
Secure e-bike storage concepts for hotels, resorts and bike-friendly communities. Start with a practical garage, epoxy flooring and organized racks, then choose charging, climate control and access options for your site.